学術論文
L. Liu, H. Takagi, K. Miyazaki, J. Shi and J. Wang, “Signal Preemphasis Technique for 10–60 MHz High-Speed Implant Communication System With Bandwidth-Limited Small Antennas,” IEEE Transactions on Antennas and Propagation, vol. 72, no. 5, pp. 4399-4409, May 2024.
M. Hara, J. Wang and F. Leferink, “Effect of Wall Shaking Amplitude on Vibrating Intrinsic Reverberation Chamber Characteristics,” IEEE Transactions on Electromagnetic Compatibility, vol. 66, no. 1, pp. 29-36, Feb. 2024.
S. Dan., Y. Yano and J. Wang, “Batteryless BLE Module with a Piezoelectric Element Mounted on a Shoe Sole,” Sensors, vol.24, 2829, pp.1-13, April 2024.
Y. Sui, C. Hou, Y. Wang, K.L. Chung, C. Wei, Z. Li, W.-H. Zong and J. Wang, “A Tissue-Independent Flexible Antenna With Miniaturized Size for Injectable Implants,” IEEE Antennas and Wireless Propagation Letters, vol. 23, no. 3, pp. 945-949, March 2024,
戸澤,石田,王,藤原,“ESD試験器のケーブル共振による接触放電波形のリンギング発生と検証,” 電気学会論文誌,vol.144, no.3, pp.95-104, March 2024.
Y. Wang, J. Shi and J. Wang, “Wearable Antenna Sensor Based on EBG Structure for Human Body Area Humidity Monitoring,” IEEE Sensors Journal, vol. 24, no. 3, pp. 3833-3843, Feb. 2024.
H. Ito, Y. Yano, T. Ishida and J. Wang, “Improvement of ESD Damage Test Board for CMC for Automotive Ethernet,” IEEE Letters on Electromagnetic Compatibility Practice and Applications, vol. 6, no. 3, pp. 89-95, Sept. 2024.
J. Wang, “ESD Immunity Test System for Bio-Signal-Driven Wearable Robots,” IEEE Electromagnetic Compatibility Magazine, vol. 13, no. 2, pp. 76-81, 2nd Quarter 2024, doi: 10.1109/MEMC.2024.10711975.
国際会議
Y. Tozawa, T. Ishida, J. Wang, and O. Fujiwara, “Suppression Effect of Ringing in Contact Discharge Waveform From Two Different ESD Generators via Ferrite Core Attached Return Current Cable,” Presented at APEMC 2024, Okinawa, Japan, Mar. 20-24, 2024.
M. Yoshida, Y. Yano, and J. Wang, “Measurement Method for Mixed-Mode S-Parameters of Termination Structures in Differential Communication Line,” Presented at APEMC 2024, Okinawa, Japan, Mar. 20-24, 2024.
L. Liu, J. Wang, “Improvement of Implant Communication Using Joint Spatial Transmit Diversity and Signal Pre-Emphasis,” Presented at APEMC 2024, Okinawa, Japan, Mar. 20-24, 2024.
R. Omoto, M. Fukuda, T. Shimazaki, and D. Anzai, “A Study on Normal Respiration Estimation Based on One-Class SVM Using Wearable CO2 Sensors,” Presented at APEMC 2024, Okinawa, Japan, Mar. 20-24, 2024.
H. Ito, S. Ishihara, Y. Yano, and J. Wang, “Circuit Model Construction for Simulating ESD Discharge Current Flowing Through CMCs and ESD Suppression Devices,” Presented at APEMC 2024, Okinawa, Japan, Mar. 20-24, 2024.
S. Asano, T. Kobayashi, K. Takabayashi, M. Hernandez, and D. Anzai, “Performance Evaluation of Forward Error Correcting Codes Under Implant Body Area Networks Channels for IEEE 802.15.6ma,” Presented at APEMC 2024, Okinawa, Japan, Mar. 20-24, 2024.
J. Tsuchida, T. Kobayashi, S. Yoshida, H. Miyaguchi, and D. Anzai, “Performance Evaluation of Magnetic Field-Based In-Body CA Localization,” Presented at APEMC 2024, Okinawa, Japan, Mar. 20-24, 2024.
Y. Iwaoka, Y, Yano, and J. Wang, “Extraction of Parasitic Impedance Difference Between Electronic Device Test Boards,” Presented at APEMC 2024, Okinawa, Japan, Mar. 20-24, 2024.
H. Iwasaki, Y. Yano, and J. Wang, “A Study on Reducing Cable Length Dependence for Automotive Ethernet EMC Evaluation,” Presented at APEMC 2024, Okinawa, Japan, Mar. 20-24, 2024.
M. Kota, L. Liu, and J. Wang, “Generalized MMSE-Based Pre-Emphasis for High-Speed Implant Communication,” Presented at APEMC 2024, Okinawa, Japan, Mar. 20-24, 2024.
Y. Oguri, S. Ishiguro, T. Kobayashi, and D. Anzai, “Evaluation on UWB Ranging Performance for IEEE 802.15.6ma in Coexistence Environment,” Presented at APEMC 2024, Okinawa, Japan, Mar. 20-24, 2024.